Omron NS Reference Manual page 37

Hide thumbs Also See for NS:

Section2 Functions

NS series Macro Reference

MOVEPOPWDOWN

Applicable versions

Format

Function

Return Value

Example

Reference

When setting macro "MOVEPOPWDOWN" for ON/OFF button, Word button, Command button and

Multifunction Object on a pop-up screen and moving the pop-up screen, select "Touch Off Timing". If

"Touch On Timing" is selected, the status of the object will be pressed.

Moves pop-up window down

System version 2 or higher

MOVEPOPWDOWN(n, y)

Move the pop-up window page number "n" to y down.

Setting range for "n" is 0 to 3999. If the value outside of the range or page number

which does not existed is specified, return value "-1" will be returned. There is no

restriction on setting value for "y". However, set the value to the pop-up screen in

order to be displayed inside of the screen. Part of the screen or whole screen may

be deleted depending on the set value.

0: Completed normally

-1: Specified no page

$W0=MOVEPOPWDOWN(10, 32);

'Move the pop-up window page number 10 to 32dot down,

'then return "0"to $W0. If pop-up screen is not displayed,

'return "-1" to #W0.

Ns-series