Omron K3NC - MANUAL 2 Operation Manual page 37

Setting Mode
30
3. Press the Up Key to change the prescaling bank setting. The input will be
validated automatically if no change is made for five seconds. The
prescaling bank setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The
prescaling value X (mantissa) of input A setting will be displayed for
setting the next parameter.
Set Value LED Display Model
4. Press the Mode Key to display the
input A setting.
Set Value LED Display Model
5. Press the Shift Key to display the set value
indicator will flash.
Set Value LED Display Model
6. Press the Up and Shift Keys to set the value to
dated automatically if no change is made for five seconds. The
caling value X (mantissa) of input A setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The
prescaling value X (mantissa) of input A setting will be displayed for
setting the next parameter.
Set Value LED Display Model
7. Press the Mode Key to display the
input A setting.
Set Value LED Display Model
8. Press the Shift Key to display the set value
Set Value LED Display Model
Basic Model
RESET RESET
prescaling value X (mantissa) of
Basic Model
RESET RESET
for changing. The PROG
Basic Model
RESET RESET
. The input will be vali-
Basic Model
RESET RESET
prescaling value Y (exponent) of
Basic Model
RESET RESET
for changing.
Basic Model
RESET RESET
Section 3-2
pres-