Omron K3MA-J Manual page 8

Nomenclature
3. Level indicator
Name
1. Main indicator Displays current values, parameters, and set values.
2. Opera- 1 Lit when output 1 is ON.
tion indica-
2 Lit when output 2 is ON.
tors
SV Lit when a set value is being displayed or changed.
Max Lit when the main indicator is showing the MAX value.
Min Lit when the main indicator is showing the MIN value.
Z Lit during the forced-zero operation.
T Lit when the teaching function is operable. Blinks while the teaching function is operating.
3. Level indicator Displays the current level that the K3MA-J is in. (See below for details.)
4. MAX/MIN Key Used to display the MAX and MIN values when a measurement value is being displayed.
5. Level Key Used to change the level.
6. Mode Key Used to allow the main indicator to indicate parameters sequentially.
7. Shift Key Used to enable a set value to be changed. When changing a set value, this key is used to move along the digits.
8. Up Key Used to change a set value. Used to set or clear a forced-zero function when a measurement value is being displayed.
Level indicator
p Protect
Not lit Operation
s Initial setting
Advanced-function setting
f
Dimensions
8
Process Meter
2. Operation indicators
Max
1
Min
2
SV
MAX/MIN LEVEL
4. MAX/MIN key
5. Level key
Level
101.2
91
E D C B A
96
MAX/MIN LEVEL MODE SHIFT UP
K3MA-J
Z
T
MODE SHIFT UP
7. Shift key
6. Mode key
Functions
Finger protective
Main indicator
cover (provided)
character size
14.2 mm
85
97
7.6 mm
12
1.3
80
48
1. Main indicator
8. Up key
Panel cut-out
120 min.
75 min.
+0.5
92
0
+0.5
45
0
The K3MA-J uses M3 terminals.
44.8