Advertisement
Solid-state Timer
Miniature Timer Compatible with the MY
Relay
Large transparent time-setting knob facilitates time
setting. Flat-blade and Phillips screwdrivers can
also be used for time setting.
Approved by UL and CSA.
Pin configuration compatible with MY Power Relay.
LED indication for power and output statuses.
Conforms to EMC standards.
High repeat accuracy.
Ordering Information
Ope a o / ese
Operation/resetting
g
Time-limit contact
system
t
Time-limit operation/
e
o e a o /
DPDT
self-resetting
lf
tti
4PDT
Note: Specify the model number, supply voltage, and rated time when ordering.
Ex. H3Y-2
110 VAC
Accessories
Track mounted socket (see note )
ac
ou ed soc e (see o e )
PYF08A, PYF08A-N, PYF08A-E
PYF14A, PYF14A-N, PYF14A-E
Note: Track mounted socket can be used as a front connecting socket.
Specifications
Time Ranges
Rated time
1 s
Time setting
0.1 to 1 s
range
e
co ac
Time ranges
0
0.1 s to 30 min
s o 30
1 s
Rated time
Supply voltage
Solder terminal
PY08
PY14
5 s
10 s
0.2 to 5 s
0.5 to 10 s
e a ges
Supply voltage
Supp y o age
110 VAC
220 VAC
24 VDC
110 VAC
220 VAC
24 VDC
Back connecting socket
Wire-wrap terminal
PY08QN(2)
PY14QN(2)
30 s
60 s
1.0 to 30 s
2.0 to 60 s
H3Y
RC
Model
Surface /DIN-track
mounting (with socket)
H3Y-2
3
H3Y-4
3
PC terminal
PY08-02
PY14-02
3 min
30 min
0.1 to 3 min
1.0 to 30 min
1
Advertisement
Table of Contents
Related Manuals for Omron H3Y
Summary of Contents for Omron H3Y
-
Page 1: Ordering Information
220 VAC 24 VDC 4PDT 110 VAC H3Y-4 220 VAC 24 VDC Note: Specify the model number, supply voltage, and rated time when ordering. Ex. H3Y-2 110 VAC Rated time Supply voltage Accessories Back connecting socket Track mounted socket (see note ) - Page 2 2,000 VAC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-current-carrying metal parts) (see note) 2,000 VAC, 50/60 Hz for 1 min (between operating power circuit and control output) (see note) 2,000 VAC, 50/60 Hz for 1 min (between different pole contacts; 2-pole model) (see note) 1,500 VAC, 50/60 Hz for 1 min (between different pole contacts;...
-
Page 3: Engineering Data
250 VAC, cos = 0.4 24 VDC, cos = 1 24 VDC, L/R = 7 ms Reference: A maximum current of 0.6 A can be switched at 125 VDC (cos = 1). Maximum current of 0.2 A can be switched if L/R is 7 ms. In both cases, a life of 100,000 operations can be expected. - Page 4 (63.0) (63.0) Accessories (Order Separately) Use the PYF A, PY , PY -02, or PY QN(2) to mount the H3Y. When ordering any one of these sockets, replace “ ” with “08” or “14.” Track Mounting/Front Connecting Sockets PYF08A Two, 4.2...
- Page 5 3.6 dia. PYF-08A-N A2 A2 A1 30 max. PYF14A-N Terminal Arrangement Mounting Holes (for Surface Mounting) 42 32 22 12 44 34 24 14 Two, 3.5 dia. 66.5 max. PYF-14A-N 20.8 12 11 10 41 31 21 11 30 max.
- Page 6 29.5 max. 1 x 1 41.5 max. (see note) PY08QN PY14QN PY08QN(2) PY14QN(2) Note: With PY QN(2), dimension * should read 20 max. and dimension ** 36.5 max. PY08-02, PY14-02 Terminal Arrangement (Bottom View) 22 max. 29.5 25.5 max. max.
- Page 7 Socket Mounting Plates (t = 1.6) Applicable socket For mounting 1 socket For mounting 18 sockets PY08, PY14, PY08QN(2), PY14QN(2) PYP-1 PYP-18 Note: PYP-18 may be cut to any desired length. PYP-1 PYP-18 Two, 3.4-dia. holes Relay Hold-down Clips Y92H-3 for Y92H-4 for...
-
Page 8: Installation
Limited issue for Southeast Asian countries ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. L097-E1-1 In the interest of product improvement, specifications are subject to change without notice.