Output
(To change the output content of channel 2)
setting
UP
MODE
Timer
MODE
Timer disabled
Timer enabled
Timer time
MODE
E3X-MDA
22
DOWN
UP
DOWN
Sets the timer for the output of
either AND or OR, depending
Timer disabled
OFF delay timer
ON delay timer
is selected, the one-shot timer is automati-
cally set, i.e., the timer function cannot be
selected.
Setting range: 1 to 5,000 ms
1 to 20 ms
UP
DOWN
1 to 5 s
Super Dual Fiber Sensors
Output for each channel
Output when the output is ON for
both channels 1 and 2.
Output when the output is ON for
either channel 1 or channel 2.
Rising edge sync. Output if channel
1 is ON when channel 2 changes
from OFF to ON.
Falling edge sync. Output if
channel 1 is ON when channel 2
changes from ON to OFF.
Operates according to the differ-
ence between channels (channel 1
- channel 2). The difference value
is used for both threshold and out-
put judgement execution.
1-ms increments
5-ms increments
100-ms increments
1-s increments