Omron CJ - 12-2004 Manual page 76

System Settings and Auto Wait Time Setting
Communications Mode
Setting
Note
This setting is valid only when accessing EEPROM (battery-free) Data Carri-
ers. It is ignored for SRAM (built-in battery) Data Carriers. For details, refer to
the user manual for the R/W Heads and Data Carriers.
DM Area address
Head 1 of Head 2 of
CS1W-
CS1W-
V600C11, V600C12
CS1W- or CJ1W-
V600C12, V600C12
CJ1W-
V600C11,
or CJ1W-
V600C12
m m + 100
1. First word allocated to Unit in DM Area: m = D20000 + 100 × unit No.
2. Always turn the power supply to the PLC OFF and ON or turn ON the Spe-
cial I/O Unit Restart Bit after changing settings in the DM Area from a Pro-
gramming Device. DM Area setting data is transferred to Special I/O Units
only when the power supply is turned ON or the Special I/O Unit Restart
Bit is turned ON.
Bit No. Description
00 to 0 Communicate using the Com-
03 munications Distance Priority
Mode.
1 Communicate using the Com-
munications Time Priority
Mode.
Section 5-3
Default
0
(distance
priority)
57