Restarting Special I/O Units - Omron CJ - 12-2004 Manual

Restarting Special I/O Units

7-4

Restarting Special I/O Units

CS-series Special I/O Unit Restart Bits
CJ-series Special I/O Unit Restart Bits
To restart operation after changing settings in the DM Area or after removing
the cause of an error, either turn the PLC's power supply OFF and ON or turn
ON the Special I/O Unit Restart Bit.
Bit address
A50200
A50201
. .
.
A50215
A50300
. .
.
A50715
Bit address
A50200
A50201
. .
.
A50215
A50300
. .
.
A50715
Note If an error persists even though the power supply is turned OFF and ON or the
Special I/O Unit Restart Bit is turned ON, replace the ID Sensor Unit, Power
Supply Unit, or CPU Unit.
Unit 0 Restart Bit
Unit 1 Restart Bit
. .
.
Unit 15 Restart Bit
Unit 16 Restart Bit
. .
.
Unit 95 Restart Bit
Unit 0 Restart Bit
Unit 1 Restart Bit
. .
.
Unit 15 Restart Bit
Unit 16 Restart Bit
. .
.
Unit 95 Restart Bit
Section 7-4
Function
The Unit will be restarted
when the corresponding bit is
turned ON.
Function
The Unit will be restarted
when the corresponding bit is
turned ON.
101