Disposal; Declaration Of Conformity / Producer - Parkside PSB 1050 A1 - MANUAL 5 Operation And Safety Notes

The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: support.uk@kompernass.com
IE
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply.
Mobile operators may vary.
e-mail: support.ie@kompernass.com
©

Disposal

The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical power
tools with the household rubbish!
In accordance with European Directive 2002 / 96 / EC,
worn out electrical power tools must be collected
separately and taken for environmentally compatible
recycling.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out devices.
Warranty / Disposal / Declaration of conformity / Producer
©
Declaration of conformity /
Producer
We, Kompernaß GmbH, the person responsible for
documents: Mr Felix Becker, Burgstr. 21, D-44867
Bochum, Germany, hereby declare that this product
complies with the following standards, normative
documents and EU directives:
Machinery Directive
(2006 / 42 / EC)
EU Low Voltage Directive
(2006 / 95 / EC)
Electromagnetic Compatibility
(2004 / 108 / EC)
Applicable harmonized standards
EN 55014-1:2006, EN 55014-2/A2:2008
EN 61000-3-2:2006, EN 61000-3-3:2008
EN 60745-1:2009, EN 60745-2-1/A12:2009
IEC 62233:2005, EN 62233:2008
IEC 60745-2-1:2003+A1:2008
IEC 60745-1:2006, IEC 60745-2-1/A1:2008
Type / Description of product:
2-Speed hammer drill PSB 1050 A1
Date of manufacture (DOM): 06 - 2010
Serial number: IAN 49374
Bochum, 30.06.2010
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifica-
tions in the course of further development.
GB/MT 33