Page 1
POWER SCraper PEC 200 SE POWER SCRAPER Operation and Safety Notes...
Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes Page...
Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Safety class II Wear hearing protection, dust Observe caution and safety notes! protection mask, protective glasses and protective gloves. Caution – electric shock!
Failure to observe the safety advice and instructions Technical Data may result in electric shock, fire and / or serious injury. Rated voltage: 230 V ~ 50 Hz KEEP ALL THE SAFETY ADVICE AND INSTRUC-...
Accidents can happen if you carry the device Keep the device away from with your finger on the ON / OFF switch or with rain or moisture. Water entering the device switched on. an electrical device increases the d) remove any setting tools or spanners before you switch the device on.
General safety advice for electrical power tools / Before taking tool into use d) When not in use always ensure that Do not soak the materials or the area electrical power tools are kept out of to be worked with liquids containing reach of children.
Note: The optimal stroke rate is dependant on tool must always point downwards. the material or the surface to be worked. It is best Inserting a tool attachment: determined by simple trial and error. Always start Push the tool lock forwards to “UNLOCK”.
Before you clean or maintain the replacement carried out by the the device always pull the mains lead out of the manufacturer or its service centre. This mains socket. will ensure that your device remains safe to use.
* Standard call rates apply. Type / Device description: Mobile operators may vary. Power scraper e-mail: support.ie@kompernass.com Bochum, 30.04.2009 Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of product development. 12 GB/IE/CY...