Parkside KH 3172 BELT SANDER Operation And Safety Notes

Parkside KH 3172 BELT SANDER Operation And Safety Notes

Advertisement

Quick Links

PEBS 900
Operation and Safety Notes
Operation and Safety Notes ........................................................................................Page
5

Advertisement

Table of Contents
loading

Summary of Contents for Parkside KH 3172 BELT SANDER

  • Page 1 PEBS 900 Operation and Safety Notes Operation and Safety Notes ..................Page...
  • Page 2 Kompernaß GmbH Burgstraße 21 · D-44867 Bochum (Germany) Last information update: 07 / 2006 · Ident.-No.: PEBS900 - 072006-1/ UK...
  • Page 3: Table Of Contents

    Table of Content Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. The following icons / symbols are used in this instruction manual: Read instruction manual! Watt (performance) Observe caution and safety notes!
  • Page 4: Introduction

    1 Sanding belt accompanying booklet. Keep these instructions in a safe 1 Dust collection box place. If you pass the device on to anyone else, please 1 Extraction adapter ensure that you also pass on all the documentation. (for external vacuum dust extraction)
  • Page 5: Safety

    Do not sand materials containing asbestos. Do not operate the device if the mains lead or Firmly support the workpiece (in a clamp or mains plug is damaged. vice) unless its own weight is enough to keep Caution! A damaged mains lead presents it in place.
  • Page 6: Preparing For First Use

    (see the Devices marked with 230 V can also be operated section on “Selecting the correct rotational speed at 220 V.
  • Page 7: Operation

    . Press the 2 unlocking buttons (one on each side) and open the dust collection box , knock out the contents on You can select the belt speed using the belt speed a solid surface. adjuster wheel even whilst the sander is running.
  • Page 8: Using The Sander In A Fixed Mounting

    Attention: Before you carry out any work on Insert the pins of the screw clamps through the right and left hand holes on one of the long the belt sander always pull the plug out of the sides of the mounting frame to suit the side to mains socket.
  • Page 9: Disposal

    Information Bochum, 31.07.2006 Service Details of the Service Centre responsible for your region are shown in the warranty documents. Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of further development. GB/IE...

This manual is also suitable for:

Pebs 900 se

Table of Contents