Delivery Includes - Sennheiser VMX 200 Instruction Manual

Delivery includes

Delivery includes
VMX 200 mono Bluetooth headset
with built-in rechargeable Lithium-Polymer battery
Ear hook
Ear adapter without loop
Ear adapters with loop (S, M, L)
VMX 200 power supply unit (EU/UK/US/AUS version)
Charging cable
Charging the VMX 200 Switching the VMX 200 on/off
Quick Guide
Pairing the VMX 200
EN
Important safety information
VMX 200 The VMX 200 has been manufactured according to
the accepted rules and current technology. Howe-
ver, there is still a danger of damage to equipment
if the following general safety instructions are not
complied with.
Read these instructions.
Follow these instructions.
Keep these instructions in a location where they
are accessible to all users at all times.
Always include the operating instructions when
you pass the VMX 200 on to third parties.
A detailed instruction manual for the
senncom.com VMX 200 can be found on our website
at www.senncom.com.
Intended use
The VMX 200 is an accessory for mobile phones or
any Bluetooth ® compliant device with a „hands
free" (HFP) or a „headset" (HSP) profile intended
for wireless communication via
tion in dry environments.
Safety Guide
It is considered improper use when the VMX 200 is
used
for any application not named in these instruc-
tions,
under operating conditions that deviate from tho-
se described in these instructions.
General instructions
Never disassemble or modify components of the
VMX 200.
The built-in rechargeable battery may present
a fire or chemical burn hazard if mistreated.
Therefore, do not disassemble, heat above 40 °C
(104 °F) or incinerate the rechargeable battery.
Sennheiser Communications is not liable for da-
mages resulting from the loss of connection due
to a run flat battery, an old battery or exceeding
the transmitting range.
Before operation
Use the VMX 200 in dry places only and keep li-
quids and small electrically conductive parts away
from the VMX 200 and its connecting sockets.
Do not expose the VMX 200 to extreme tempera-
tures. Normal operating temperatures are 10 °C
(50 °F) to 40 °C (104 °F).
Store the headset in a clean, dust-free environ-
ment.
During charging
WARNING Do not wear the headset when
Safety charging.
The headset must be charged with the VMX 200
power supply or the optional VMX 200 charging
guide accessories.
Never try to charge batteries other than the one
in the VMX 200 headset with the VMX 200 power
supply or the optional VMX 200 charging acces-
sories.
Sennheiser Communications is not liable for da-
mages to USB devices that are not consistent with
the USB specifications.
A list of accessories can be found on the VMX 200 product page at
www.senncom.com. For information on suppliers, contact your local
Sennheiser partner: www.senncom.com > "Sales Partner"
VMX 200 | 5