HSP2.book Seite 16 Donnerstag, 27. Januar 2005 10:11 10
Delivery includes
Boom microphone
Neckband
Neckband connecting cable
Plastic transport case, foam-lined with cut-outs
Instructions for use
Warranty Certificate
Attaching the microphone boom
The neckband has two holders which are designed so that
the microphone booms can be worn on either side of the
mouth.
To change the microphone
boom, carefully lever it out of
the holder. To attach the micro-
phone boom, press it into the
holder until it snaps in. The up-
per round recess is for the HSP 2
(∅ 1.1 mm). The lower square recess at the front keeps the
HSP 4 in a fixed, non-rotating position, thus ensuring that
the sound inlet is reliably directed towards the mouth.
Adjusting the neckband
You can adjust the neckband to
fit all head sizes. To do so,
change the length of the
neckband by pushing in or
pulling out the ear bows.
16