Switching The Vmx 200 On/Off; Switches The Headset On; Switches The Headset Off - Sennheiser VMX 200 Instruction Manual

Using the VMX 200
14 | VMX 200

Switching the VMX 200 on/off

Switching the headset on
Press and hold the multi-function button until the LED flashes blue
3 times. You hear an ascending sequence of beeps in the headset.
3 s
The LED then indicates the current operating mode.
LED flashes Meaning
Searching mode: The headset automatically tries to
2s
connect to the two last connected Bluetooth devices.
Pairing mode: The headset establishes a connection to a
2s
Bluetooth device.
Incoming call: The mobile phone transfers the call to the
1s
headset.
Active call: The headset is just being used for an active
1s
call.
Switching the headset off
If the headset has not been used for more than 1 hour, it automatically
switches off to conserve battery power.
Press the multi-function button for 3 seconds.
You hear a descending sequence of beeps in the headset and the LED
flashes red 3 times. The headset switches off and the call is transfered
to the Bluetooth device.
3 s
Connection profiles and volume settings are saved automatically
when the headset is switched off.
3x
ON
3x
OFF