Table of Contents
Advertisement
CH 03
LINE
MIC
Muting the devices
Muting the bodypack transmitter
Push the
MUTE
switch
The red LED
permanently. The MIC level display
shows any deflection. The bodypack transmitter is
muted.
Note:
The muting function (MUTE) mutes the microphone
input
only, not the line input
enables a pre-recorded track to be played through
the line input without being disturbed by the tour
guide's microphone.
To deactivate the muting function:
Push the
MUTE
switch
The red LED
LOW BATT/MUTE
level display
the current levels.
Muting the wireless microphone
Twist the cap
microphone until you can see the
Push the MUTE switch
by the arrow.
"MUTE" appears in the display of the wireless
microphone. After 5 minutes
the display ("Display of the energy saving mode"
on page 14).
To deactivate the muting function:
Push the
MUTE
switch
Using the components
to the left, to "MUTE".
LOW BATT/MUTE
back to the right.
goes out. The
and the
LINE
level display indicate
at the base of the wireless
MUTE
in the direction indicated
"CH
OFF" appears in
back to transmit again.
lights up
no longer
. This function
MIC
switch
.
35
Advertisement
Table of Contents
