Table of Contents
Advertisement
Using the components
40
Repeatedly press / until "RESET" appears in the
display.
Press the
SET
button.
"RST.OK" flashes on the display.
Press the
SET
button to load the factory-preset
default settings on the device.
"DONE" briefly appears on the display. The
bodypack transmitter / the wireless microphone is
reset to the following factory-preset default
settings:
Channel: 1
Line input: switched off (only bodypack
transmitter)
Input sensitivity
Line input:
24 dB (only bodypack transmitter)
–
–
Microphone input: –12 dB
–
Lock mode: deactivated
Infra-red service interface: deactivated
Activating/deactivating the lock mode
The lock mode prevents the bodypack transmitter /
the wireless microphone from being accidentally
programmed or switched off during operation.
To
activate
the lock mode:
ON/OFF
ON/OFF
Bodypack transmitter
Press the
SET
button.
The operating menu appears. The first menu item
"CHAN" flashes.
Repeatedly press
display.
LOW BATT
MUTE
PEAK
SET
SET
Wireless microphone
/
until "LOCK" appears in the
Advertisement
Table of Contents
