Using the components
32
Setting the channel
To set the complete system to a certain channel,
proceed as follows:
1. Set
the
microphone to the desired channel (see next
section).
2. Set any of the receivers to the same channel (see
"Setting the receiver channel" on page 33).
3. Automatically set all other receivers to the same
channel using the channel copy function (see
"Setting the receiver channel(s) using the channel
copy function" on page 34).
Setting the channel on the bodypack transmitter/
wireless microphone
To set the bodypack transmitter or the wireless
microphone to the desired channel, use the device's
operating menu. An overview of the operating menus
is given from page 43 onwards.
Make sure that the lock mode is deactivated (see
"Activating/deactivating the lock mode" on
page 40).
ON/OFF
ON/OFF
Bodypack transmitter
Press the
SET
button.
The operating menu appears. The first menu item
"CHAN" flashes.
Press the
SET
button.
The current channel flashes.
bodypack
transmitter/wireless
LOW BATT
MUTE
PEAK
SET
SET
Wireless microphone