Muting The Audio Signal Or Deactivating The Rf Signal - Sennheiser SK 2000 Instruction Manual

Press the
SET ON/OFF
"Locked" appears on the display panel.
Press the UP/DOWN button
"Unlock?" appears on the display panel.
SET
Press the
The lock mode is temporarily deactivated.
– When you are in the operating menu, the lock mode
remains deactivated until you exit the operating menu.
– When one of the standard displays is shown, the lock mode
is automatically activated after 10 seconds.
The lock mode icon

Muting the audio signal or deactivating the RF signal

·
The MUTE switch
the RF signal. Via the
function of the MUTE
Slide the MUTE switch · ...
Setting
"AF On/Off" ... to the left (position MUTE) Mutes the audio signal
... to the right
"RF On/Off" ... to the left (position MUTE) Deactivates the RF signal
... to the right
"Disabled" No function
From the "Mute Mode" menu item, select the desired setting.
Exit the operating menu.
Slide the MUTE switch
The bodypack transmitter reacts as indicated in the table.
SET button or the ON/OFF
SET button.
flashes prior to the lock mode being activated again.
B.Ch: 20.64
**2000**
PEAK
40 0
543.200
-10
30
-20
20
-30 SKM2000
EQ:
10
-40
P + 12dB
MUTE
AF
RF
·
allows you to mute the audio signal or to deactivate
"Mute Mode" menu item, you can set the desired
switch ·.
·
to the left, to the position MUTE.
Using the bodypack transmitter
button.
/ .
MHz
Function
Unmutes the audio signal
(offline operation)
Activates the RF signal
(online operation)
13