Table of Contents
Advertisement
Using the components
36
Special bodypack transmitter/wireless
microphone settings
The following special settings can only be made via
the bodypack transmitter's/wireless microphone's
operating menu. An overview of this operating menu
is given from page 43 onwards.
Switching the bodypack transmitter's line input on/off
You can connect an audio source, such as a CD player,
MP3 player, etc. to the transmitter's line input. If you
have connected an audio source, you then have to
switch on the line input as follows:
Press the
SET
button
The operating menu appears. The first menu item
"CHAN" flashes.
Repeatedly press the
direction until "LINE" flashes on the display.
Press the
SET
button
If the line input is switched off, "LINE.OFF" flashes
on the display; if the line input is switched on
"LINE.ON" flashes on the display.
Press the
/
setting.
Press the
SET
button
setting.
"STORED" briefly appears on the display.
Adjust the sensitivity of the line input to match the
connected audio source, as described in the
following section.
Changing the sensitivity of the line input on the
bodypack transmitter
To adjust the sensitivity of the line input to match the
connected audio source:
Make sure that the line input is switched on (see
previous section).
.
/
rocker button
.
rocker button
to change the
to permanently store the
in the
Advertisement
Table of Contents
