Table of Contents
Advertisement
Using the devices
22
Easy Setup Sync
Either:
Store the frequency bank and channel
setting by pressing the jog dial on your
transmitters.
The RF signal is activated. You can carry
out the
Sync
function (see right-hand
column) at a later time to establish a
transmission link between transmitters
and receivers.
Or:
Immediately synchronize your receivers
with your transmitters by carrying
out the
Sync
function (see right-hand
column). The
icon in the left lower
corner of the transmitter display indicates
that the
Sync
function can be carried out.
The transmission link between transmit-
ters and receivers is established.
–
Sync
–
–
To cancel the transfer:
Press the
STANDBY
transmitter.
" " appears on the display panel of the
transmitter. " " also appears if no suit-
able receiver was found.
button on the
Advertisement
Table of Contents
