Muting The Audio Signal - Sennheiser EM 500 G3 - 02-09 Manual

Using the receiver
24

Muting the audio signal

To mute the audio signal:
When one of the standard displays is shown on the display
panel, press the
"RX Mute On?" appears on the display panel.
Press the jog dial.
The audio signal is muted.
the current standard display. The display panel is backlit in red.
To unmute the audio signal:
Press the STANDBY
"RX Mute Off?" appears on the display panel.
Press the jog dial.
The muting is canceled and the display backlighting changes
from red to orange again.
If "RX Mute On?" or "RX Mute
do not wish to change the status of the muting function:
Press the STANDBY
The status of the muting function remains unchanged and the
current standard display appears.
STANDBY button.
"RX Mute" flashes in alternation with
button.
Off?" appears on the display panel but you
button.