Sennheiser EM 500 G3 - 02-09 Manual page 41

Adjustment tips and functions
Setting a frequency
bank and a channel
and assigning this
channel a receiving
frequency
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
40
Turn the jog dial until the "Tune" menu item appears.
Press the jog dial and keep it pressed until the frequency bank
selection appears.
PEAK Advanced Menu
40 0
Exit
-10
30
Tune
-20
20
-30 Sync Settings
10
-40
542.625 MHz
RF AF
Call up "Tune"
(special function)
Set the desired frequency bank.
Press the jog dial.
The channel selection appears.
Set the desired channel.
Press the jog dial.
The frequency selection appears.
Set the desired frequency.
Press the jog dial.
Your settings are stored.
You are back to the operating menu.
Changing the settings of the guitar tuner
The following settings are available:
Setting Meaning
"Inactive" The "Guitar
(see page 25).
"Active" When selecting the
(see page 25), the receiver is
"Audio Mute" When selecting the
(see page 25), the receiver is muted.
PEAK Tune
40 0
-10
30
542.625 MHz
-20
20
-30
10
-40
B.Ch: U1. 1
RF AF
Set the frequency
bank and the channel
"Stored"
Tuner" standard display is deactivated
"Guitar Tuner" standard display
not
"Guitar Tuner" standard display
PEAK Tune
40 0
-10
30
542.625 MHz
-20
20
-30
10
-40
B.Ch: U1. 1
RF AF
Set the frequency; store
the setting
muted.