Table of Contents
Advertisement
Product overview
AF
COM
L
J
K
COM
N O P Q R S
12
Command display (status display of the audio outputs AF and
Command)
The command display is only available with the EM 3732-II COM twin
receiver.
Besides the two audio outputs
also features the two command outputs
Via the "Command" menu, you can configure the receiver so that – with
the command button of the transmitter pressed – the audio signal is
available at only one of the outputs or at both (see "Configuring the audio
M
outputs of the EM 3732-II COM" on page 34).
The command display
transmitter's audio signal is available.
When "AF" lights up brightly, the audio signal is available at the audio
AF
K
and/or M.
output
When "AF" does not appear, the audio signal is
K
and/or M.
output
When "COM" lights up brightly, the audio signal is available at the
command output
When "COM" does not appear, the audio signal is
command output
LEDs for booster supply of antenna inputs
The LEDs for booster supply of antenna input A
when:
• the booster supply voltage is applied to the corresponding antenna
O
and/or B R.
input A
The LEDs for booster supply of antenna input A
when:
• the booster supply voltage for the corresponding antenna input A
R
and/or B
is switched off or
• the booster supply voltage is short-circuited or overloaded.
K
M
and
the EM 3732-II COM twin receiver
J
and L.
shows the audio output at which the
J
and/or L.
J
and/or L.
not
issued on the audio
not
issued on the
N
S light up
and/or B
N
S go off
and/or B
O
Advertisement
Table of Contents
