Table of Contents
Advertisement
SKM 100 G2 / SKM 300 G2 / SKM 500 G2 radiomicrophones
30
Remove the screw and put it to one side.
Remove the microphone module by pulling it out of the housing
as shown. Do not touch the contacts!
Insert the new module.
Secure the capsule by tightening the screw.
Note:
The screw mechanically secures the microphone capsule. If the
screw is missing, malfunctions may occur during tough use.
Put on the sound inlet basket and identification ring supplied
with the new microphone headand screw it tight.
Insert the batteries/accupack.
Close the radiomicrophone and put it into operation.
Note:
Microphone capsule, sound inlet basket and foam insert form an
acoustic unit and must therefore always be exchanged all
together. Each microphone head comes with a color-coded iden-
tification ring to distinguish different microphone heads from
each other (green = MD 835, blue = MD 845, red = ME 865).
Using the radiomicrophone
Switching the radiomicrophone on/off
The radiomicrophone can only be switched off when the standard
display is shown on the display panel. When in the operating menu,
briefly pressing the
ON/OFF
tion) and return you to the standard display with the last stored
settings.
Note:
Remove the batteries or the rechargeable battery when the radi-
omicrophone will not be used for extended periods of time.
Turn the protective cap
so that the
ON/OFF
button
Press the
ON/OFF
button to switch the radiomicrophone on. The
red LED
lights up.
To switch the radiomicrophone off, press the
until "
" appears on the display. The red LED
OFF
button will cancel your entry (ESC func-
at the bottom of the radiomicrophone
becomes accessible.
ON/OFF
button
goes off.
Hide quick links:
Advertisement
Table of Contents
