Sennheiser EK 1038 Instructions For Use Manual page 14

Using the receiver
14
Starting the setup menu
In order to get into the configuration menu, the receiver must be
switched off.
Open the battery compartment.
Press the SET button
At the same time, turn the volume control
clicks to switch the receiver on. The "SETUP" display appears on
the display panel.
Function of the buttons in the setup menu
Buttons Mode
Start display
SET
Operating menu
Setting mode
Start display
Operating menu
/
Setting mode
Start display
Operating menu
ESC
Setting mode
and keep it pressed.
clockwise until it
To ...
get from the start display "SETUP" to
the operating menu of the setup
menu
get into the setting mode of the
selected menu
store the settings and return to the
top menu level
without function
change to the previous menu ( ) or
change to the next menu ( )
adjust the setting of the selected
menu: option ( / )
without function
cancel the adjustment and return to
the start display "SETUP"
cancel the entry and return to the
start display "SETUP"