Overview Of The Displays - Sennheiser EK 100 - 01-09 Instruction Manual

Product overview

Overview of the displays

After switch-on, the diversity receiver displays the "Frequency/Name"
standard display. For further illustrations and examples of the different
standard displays, refer to page 10.
The display backlighting is automatically reduced after approx. 20 seconds.
Display
RF level "RF"
(Radio Frequency)
Audio level "AF"
(Audio Frequency)
Frequency
Name
Lock mode icon
Battery status
Muting function
"MUTE"
or line output level
AF OUT
Pilot tone "P"
6
823.925
ew100 G3
P
MUTE
RF AF
Meaning
Diversity display:
RF signal level:
Field strength of the received signal
RF
Squelch threshold level
Modulation of the transmitter
Peak hold function
When the display shows full
deflection, the audio input level
is excessively high.
AF
For details, see page 16.
Current receiving frequency (see page 16)
Freely selectable name of the receiver
(see page 16)
Lock mode is activated (see page 10)
Charge status:
"Mute" is only displayed on the
Name" standard display (see page 10) when
the transmitter's RF signal is deactivated.
The diversity receiver does then not output
an audio signal.
The line output level
displayed on the
Name" standard display (see page 10).
Activated pilot tone evaluation
(see page 18)
MHz
Antenna input I is active
Antenna input II is active
approx. 100%
approx. 70%
approx. 30%
charge status is critical, the red
LOW BATT LED
AF OUT
"Frequency bank/Channel/
is flashing:
»
"Frequency/
is only