Overview Of The Displays Of The Ek 100 G3 - Sennheiser 100-P - 01-09 Instruction Manual

Product overviews
8

Overview of the displays of the EK 100 G3

After switch-on, the diversity receiver displays the standard display "Frequency/Name".
For further illustrations and examples of the different standard displays, refer to page 22.
The display backlighting is automatically reduced after approx. 20 seconds.
533.875 MHz
ew100 G3
P
MUTE
RF AF
Display
RF level "RF"
(Radio Frequency)
Audio level "AF"
(Audio Frequency)
Frequency
Name
Lock mode icon
Battery status
Muting function
"MUTE"
or
line output level
AF OUT
Pilot tone "P"
Meaning
Diversity display:
Antenna input I is active
Antenna input II is active
RF signal level:
Field strength of the received signal
RF
Squelch threshold level
Modulation of the transmitter
Peak hold function
When the display shows full deflection, the audio
input level is excessively high.
AF
Current receiving frequency
Freely selectable name of the receiver
Lock mode is activated
Charge status:
approx. 100%
approx. 70%
approx. 30%
Charge status is critical; in addition,
the red LOW BATT
"Mute" is only displayed on the "Frequency/Name" standard
display (see page 22) when no RF signal is being received.
The diversity receiver then does not output an audio signal.
The line output level AF OUT
"Frequency bank/Channel/Name" standard display
(see page 22).
Activated pilot tone evaluation
LED is flashing.
is only displayed on the