Jack Cover - Sony HDR-GW77V/B Operating Manual

4
Connect the AC Adaptor (),
the power cord (mains lead) ()
and the USB cable () to your
camcorder and the wall outlet
(wall socket).
The CHG (charge) lamp turns on.

The CHG (charge) lamp turns off when the

battery pack is fully charged. Disconnect
the USB cable from the USB jack of your
camcorder.
5
Close the battery/memory card/

jack cover.

Flip the battery/memory card/jack cover

back (), then slide () and close the cover
firmly until the yellow mark of the cover lock
lever is hidden.
Notes
You cannot insert any battery pack other than an NP-BG1 (supplied) or an NP-FG1 (sold separately) into

your camcorder.
You cannot use a Sony CP-AH2R, CP-AL, or AC-UP100 portable power supply device (sold separately)

to charge the camcorder.
In the default setting, the LCD screen turns dark if you do not operate the camcorder for about 1 minute,

and the power turns off if you do not operate the camcorder for 2 minutes, to save battery power ([Power
Save] p. 49).
US
1
CHG
(charge)
lamp

USB plug
USB plug
(big)
To the wall outlet (wall socket)
(small)

