Putting On The Rain Cover - Sony HDW-700 Operation Manual

5-9 Putting On the Rain Cover

Attach the rain cover as illustrated below. You can insert and remove
cassette tapes, operate various switches and controls, and mount the
camcorder on the tripod adaptor with the rain cover attached.
To attach the shoulder
strap, pass the strap
through this opening
and tighten the
drawstring.
Back of
camcorder
You can insert and
remove cassette
tapes here.
You can operate
switches and controls on
the camcorder from here.
To hold the grip, insert
your hand here.
To attach a video light or other
accessory, open the velcro tape.
Hook A
Hook B
Hook C
Front of
camcorder
Close the velcro tape.
To attach the BKW-401 Viewfinder
Rotation Bracket (not supplied),
remove hook C from hook A, and
insert the end of the microphone in
here.
To take the microphone out of the
rain cover, open the velcro tape,
extend the microphone holder
outside of the rain cover, and attach
the microphone. After attaching the
microphone, close hooks A and B.
Chapter 5 Setting Up the Camcorder
5
5-33