Table of Contents
Advertisement
Available languages
Available languages
unnecessary images (p. 38).
Total number of movie scenes or photos
exceeds the recordable capacity of your
camcorder (p. 52). Delete unnecessary images
(p. 38).
The camcorder stops operating.
The camcorder may stop recording if the
camcorder is subject to continuous vibration.
"PlayMemories Home" cannot be installed.
Check the computer environment or
installation procedure required to install
"PlayMemories Home. "
"PlayMemories Home" does not work
correctly.
Quit "PlayMemories Home" and restart your
computer.
The camcorder is not recognized by the
computer.
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the computer
and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in the correct order.
Self-diagnosis
display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
You may hear a melody when some
warning indicators appear on the screen.
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E::
Follow the steps from on page 50.
The battery pack is nearly used up.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
No memory card is inserted (p. 24).
When the indicator flashes, there are not
enough free spaces for recording images.
US
1
Advertisement
Chapters
Table of Contents
