TEFAL GV8150 PRO EXPRESS TURBO Instructions For Use Manual page 29

S
ETTING THE TEMPERATURE CONTROL SLIDE AND STEAM OUTPUT CONTROL DIAL ACCORDING TO TYPE OF FABRIC TO BE IRONED
Type of fabric
Linen
Cotton
● ● ●
Wool
Silk, Viscose
● ●
Synthetic,
Polyester, Acetate,
Acrylic, Polyamide
●
To obtain steam, press on the steam control button beneath the iron handle and
keep it pressed (11).The steam will stop when you release the button.
It is recommended that you start with fabrics to be ironed at a low
temperature : synthetics (
For delicate fabrics (
of the iron) intermittently to avoid possible water droplets appearing with
the steam.
Recommendations:
• To prime the steam circuit, either before using the iron for the first time, or if you have not used the steam function
for a few minutes, press the steam control button several times in a row, holding the iron away from your clothes.
This will enable any cold water to be removed from the steam circuit
Iron temperature control slide setting:
• Start with the fabrics to be ironed at a low temperature (●) and finish with those which need higher temperatures
(●●● or Max).
- Mixed fibre fabrics: set the ironing temperature to the setting for the most delicate fabric.
- Woollen garments: press repeatedly on the steam control button to obtain short bursts of steam, without placing the iron
on the garment itself.This will avoid making the fabric shiny.
Steam output control dial setting:
- Thick fabric : increase the steam setting.
- At a low temperature : set the steam output control dial to the low position.
To iron without using steam:
• Do not press on the steam control button under the iron handle.
Ironing Board:
For best results, a mesh type ironing board should be used to allow any excess steam to escape.
• If you are using starch, it should be sprayed onto the reverse side of the fabric to be ironed.
7- WHEN THE RED LIGHT "WATER TANK EMPTY" COMES ON
There is no more steam.The removable water tank is empty (12).
1. Grasp the handles of the removable tank and pull horizontally to remove it; fill with water.
2. Replace and push it firmly into place.
3. Press the "restart" button on the control panel to continue ironing.
●
).
●
), press the steam control button (under the handle
Setting the temperature
control slide
linen
cotton
wool
silk
synthetic
linen
cotton
wool
silk
synthetic
linen
cotton
wool
silk
synthetic
Setting the steam output
control dial
:
11
12