Table of Contents
Advertisement
Installation
2
Install the amplifier where it will not get in the way of driving,
and will not be a danger to passengers during an emergency
stop:
the gas line, brake lines, electrical wiring, ete.
e
Use only the parts supplied, and install the amplifier securely. If
parts other than those supplied (specified) are used, they may
come loose or cause damage to internal parts of the amplifier.
14
»
If mounting the amplifier vertically, buy some
5-mrm-diameter
screws and nuts,
and use them to secure the amplifier firmly, so that
it cannot be dislodged by the
vibration of the car.
+ There are 4-mm-diameter screw holes on the right and left at the
rear of the amplifier,
These are used to fit an optional amplifier
installation end cap. Do not use them for anything else
Screw holes (4-mrm-diametert
for end ¢
Advertisement
Table of Contents
