Before Cooking; During Cooking - TEFAL CLIPSO User Manual

Before cooking

8
Before each use, check that the control module is correctly fastened
(retaining nut is tightened); you can use a coin if necessary.
Before each use, check that the operation valve inside the lid can
move freely.
Close the lid.
Set the programme selector to the position indicated in your recipe.
If you have a Clipso Control, set the timer for the required cooking
time.
Put the pressure cooker on the heat source at the highest
temperature.
!
Turn the pressure cooker so that the unlocking button is
facing you.
It is normal to see steam release from the pressure indicator before
steam is released from the steam outlet. Condensation may also
appear in this area as well. This is all normal.
As soon as the pressure indicator has risen, you cannot open the
pressure cooker.
With Clipso Control model, it is normal to hear air and steam
release for a while (from a few seconds to a few minutes).
If the pressure indicator does not rise:
This is perfectly normal for the first few minutes of operation.
If the problem persists, and the pin has not risen, check that:
The heat source is on the highest setting.
There is sufficient enough liquid in the pressure cooker.
The programme selector is not set on
The cooker is properly closed.
The control module is properly fixed on.
If the pressure indicator has risen but no steam is
released from the steam outlet during cooking:
Position the programme selector on
- If still no steam is released, place the pressure cooker under cold
running water to release the pressure inside the cooker, and then open
the cooker and clean the operating valve and the steam release outlet.
- If steam is released, then the pressure level inside the cooker is
not sufficient for cooking so reposition the programme selector on the
original setting.
16
.
: