Dash & Play Operation - Kenwood MIDI M-85 Instruction Manual

Midi compact audio system
Table of Contents

Advertisement

M@ Rewind & Play operation
@ Dash & Play operation
This operation is not available from the remote con-
The Dash & Play skips long non-recorded
spaces
trol unit.
automatically as the tape is played.
This
operation
is not
available
from
the
remote
control unit.
Direction of tape diection indicator: >
1 Determine the playback mode (conditions).
A al
«
DIRECTION
Press simultaneously.
The indication changes every time the key is pressed.
Direction of tape diection indicator: <4
>
... Two sides are repeated 8 times, after which
playback stops.
... Two sides are repeated only once, after which
playback stops.
.. One side is repeated 8 times, after which play-
Hf Single-tune repeated playback
operation
@ In case the [DIRECTION | key is set to" => * and tapes are
inserted in both of the decks, when a deck finishes Dash &
Play, the other deck starts Dash & Play for 16 times, after
which it stops.
1 Play the tune to be repeated.
2 Press the] and] keys simultaneously.
2 Press the play key of the same direction as
the current tape transport direction.
When direction of tape diection indicator is >
@ Normal playback resumes after repeating the same tune for
16 times.
To cancel the playback above in the middle
Om
REC LEVEL
@ Playback is stopped.
|
M-85/M-959 (En) 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Midi m-959

Table of Contents