Ssd; Removing The Ssd From Carrier; Installing The Ssd In Carrier - Dell Latitude 7424 Rugged Extreme Service Manual

SSD

Removing the SSD from carrier

1. Follow the procedure in
2. Remove the:
a. Batteries.
b. SSD(Primary or Secondary).
3. Remove the two 'M2*5' screws [1] and flip over the SSD carrier [2].
4. Remove the single 'M2*5' screw [3] and separate the cover from the SSD carrier [4].
5. Separate the SSD and interposer [1] from the SSD carrier tray.
6. Flip over the assembly [2] and disconnect the SSD from the interposer [3].

Installing the SSD in carrier

1. Connect the SSD to the interposer [1], flip over [2].
2. Install the SSD with interposer on the SSD carrier tray preassembled with new thermal pad [3].
3. Install the cover [1] on the SSD carrier and install the single 'M2*5' screw [2].
4. Flip over the SSD carrier [3] and tighten the two 'M2*5' screws [4] securing the cover to the SSD carrier.
Before working inside your computer.
Removing and installing components 67