Table of Contents
Advertisement
Menu Item
(custom)
(off)
[Splash screen]
[Import] [Restore]
Audio & EQ Settings
Menu Item
[Fader/Balance]
[Loudness]
[Off] [Low] [Mid] [High]
Description
Select the background display image of the connected USB
storage device.
1
Connect the USB storage device to this product
(page 28).
2
Touch
.
Select the desired image.
3
Displays the background display image imported from the
USB storage device.
Hides the background display.
Select [Import] to change the image on the opening screen
to the one imported from the connected USB device.
Select [Restore] to restore the default image.
NOTES
• The image files that can be imported are as follows:
– Format: BMP and JPEG
– Data size: 6 MB or less (for both BMP and JPEG)
– Image size (W×H): 800 × 480 pixels
• Make sure that the image file is located within the root (top)
folder of the USB device.
• If multiple image files are stored on the USB device, the desired
image file may not be imported from the USB device. Store only
one desired image file on the USB device.
Description
Touch
or
to adjust the front/rear speaker balance.
Set [Front] and [Rear] to [0] when using a dual speaker
system.
Touch
or
to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed
table.
NOTE
This function is available when [Standard Mode] is selected as the
speaker mode.
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
- 48 -
Advertisement
Table of Contents
