Table of Contents
Advertisement
1. Stop the motor.
2. Do a visual check for damage for example, cracks.
3. Release and attach the quick release mechanism to
make sure that it operates correctly.
4. If the harness has a hip pad and a hip strap,
make sure that the quick release function operates
correctly.
Cutting attachment
WARNING:
make sure that the cutting attachment stops
completely before you work on any part of
the cutting attachment.
WARNING:
attachment. Only use the cutting attachment
with the guards we recommend, refer
Approved accessories on page 24 .
to
Make sure that the cutting attachment is
sharpened correctly. A cutting attachment
that is not sharpened correctly increases the
risk of blade thrust.
WARNING:
or damaged blade increases the risk of
accidents. Keep the teeth of the blade
WARNING:
obey these instructions carefully before you
use the product.
757 - 008 - 16.02.2024
Remove the battery and
Use correct cutting
An incorrectly sharpened
Safety instructions for assembly
Read, understand and
correctly sharpened. Follow the instructions
and use the recommended file gauge.
WARNING:
cause injury while it continues to spin after
the switch has been released. Need to
maintain proper control until the blade has
completely stopped rotating.
Wear protective gloves when the cutting attachment is
handled.
•
Use the grass blade to cut coarse grass.
•
Use the trimmer head to trim grass.
•
Check the cutting attachment for damage or cracks.
Replace a damaged cutting attachment.
Trimmer head
•
Always use the correct trimmer head, cutting
attachments and always use the recommended
trimmer line. Refer to
24 and the assembly in the end of the Manual.
•
Make sure that the cutter on the trimmer guard is not
damaged.
•
Make sure that the trimmer line is wound tightly
and equally around the drum to prevent unusual
vibrations from the product. Different cord lengths
can result in vibrations that are not necessary. Tap
the trimmer head to get correct length on the cord.
To increase the life of the cord it can be soaked in water
for 2 days or more before assembly. This will make the
cord more resistant.
Grass blade
•
Use correctly sharpened blades. An incorrectly
sharpened or damaged blade increases the risk of
injury.
•
Use correctly set blades. Correct blade set is 1 mm.
An incorrectly set blade increases the risk of injury
and damage.
•
To sharpen and set the blade correctly, refer to the
instructions that come with the blade.
•
Remove the battery from the product before you
assemble the product.
•
Use approved protective gloves.
A coasting blade can
Approved accessories on page
11
Advertisement
Table of Contents
