Troubleshooting - Smeg SI641ID2 Manual

Table of Contents

Advertisement

7. TROUBLESHOOTING

PROBLEM
The hob does not work.
The
results
of
cooking
unsatisfactory.
The hob smokes.
The error code E2 is displayed and
an acoustic signal is temporarily
heard.
An E1 - E3 - E4 - E5 - E6 - E7 error
code is displayed
The fuses or the magneto thermal
switch
of
the
appliance
repeatedly triggered.
The saucepans in use are making a
noise.
The cooling fan continues to function
even after the hob has been switched
off.
Sounds can be heard as if something
is creaking or switching on.
There are cracks or fissures in the
hob.
40
Instructions for the user
POSSIBLE CAUSES
-
The hob is not wired in or the main
switch is not on.
-
There is a power failure.
-
The fuse or the magneto thermal
switch of the appliance has blown.
-
The sensor keys are blocked
(child lock).
-
The keys are partially covered by
a damp cloth, a liquid or a metal
object.
-
Unsuitable saucepans have been
used.
are
-
Temperature is too high or too
low.
-
The hob is dirty.
-
Food has spilled onto the hob.
-
The
Touch-control
been activated due to food falling
on the hob, saucepans or other
objects.
-
There is a technical fault.
are
-
There is no danger to the hob or
the saucepan.
-
This
is
normal
electronics need to cool down.
-
This is for technical reasons and
cannot be avoided.
SOLUTION
-
Switch on the main switch.
-
Check the power supply.
-
Replace the fuse or reactivate the
magneto thermal switch of the
appliance.
-
Unlock the sensor keys (child
lock).
-
Remove the obstacle.
-
See "Saucepans suitable for use
in induction cooking" section.
-
Consult cooking guidelines.
-
Clean the hob once cooking is
finished. Let it cool first.
-
Use a larger saucepan.
keys
have
-
Clean the surface or remove the
object.
-
Contact Technical Support.
-
Call Technical Support or an
electrician.
-
This is normal with certain types of
pan.
because
the
-
If cracks or fissures form, or if the
glass ceramic cooking surface
breaks, turn off the appliance
immediately. Disconnect the hob
from the power supply and call
Technical Support.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Si642d2

Table of Contents