Smeg SC485N-8 Manual page 20

6.5 Operating modes
This appliance is designed to have two operating modes.
6.6 First use
On the first use, or after a power failure,
display. To be able to start any cooking function, the current time must be set.
Turn the temperature selection knob right or left to
reduce or increase the displayed time.
Keep it in the turned position to reduce or increase
more rapidly.
A few seconds after the last adjustment is made, the
time display will steady and the colon separating the
hours from the minutes will flash to indicate the start
of the countdown.
It may be necessary to alter the current time, for example due to daylight saving
hours; if so, hold the temperature selection knob turned to the right or left until
the value changes.
It is not possible to change the time if the oven is ON.
84
Instructions for the user
STAND-BY condition: this condition is set when the
function selection knob is positioned on the "0" symbol.
The appliance displays the current time.
ON condition: this condition is set when the function
selection knob is turned to any function and the
selected temperature appears on the display, or the
message "PYRO" if in pyrolysis.
will be flashing on the oven's
(Temperature knob)