Smeg SA704X-6 Manual page 13

Instructions for the user
Cooking start: as well
a lso set the cooking start time (up to 12 hours after the current time). To
set the cooking start/end time, proceed as follows.
-
Set the cooking duration time as described in the previous point.
-
Within 6/7 seconds
pressed, press the
will show he current time with the inside segme t
cooking end time illuminate
cooking start time.
-
6/7 seconds fter the last time a key is pressed
show the current time and the cooking start and en
by the illuminated inside segments. The segmen
will be constantly on unti
cooking start time; as soon as the current time reaches
start time set, all the inside segments will tart t
that the oven has started cooking.
-
W hen the end of th
off the oven heating elements, the beeps will start
on the dial will flash.
-
To reset the entire program set, keep the central ke
1 or 2 seconds
be switched off by hand.
-
The image on the right shows an example of
programming: the current time is 7.06 and
cooking is programmed to start at 8 o'clock
and finish at 9.
-
At 8 o'clock, the inside segments between 8
and 9 will start to flash a d the hour pointer will
remain still.
C aution: for the oven to start cooking after the programming proce
just descri bed, the thermostat and function selector must be properly set
on the temperature and function required.
as setting a cooking duration time, the user can
after the last time the
key to set the cooking start time. The display
d. Use the
a
l the current time is the same as the
e cooking time is reached, the timer will switch
if cooking has already started the
:
n
or keys are
nts indicating the
and keys to set the
, the display will
d times, indicat
ts on the display
the cooking
s o flash, indicating
and the numbe
y pressed for
oven will have to
dure
ed
rs
15