Smeg S45VX2 Instructions For Use Manual page 22

EN
10.4 Display messages
DISPLAY
SOFT SOFT
SOFT SOFT
med med med med
hard hard
hard hard
CAL CAL
CAL CAL
0.5L 0.5L
0.5L 0.5L
1.0L 1.0L
1.0L 1.0L
VAP VAP VAP VAP
PUMP PUMP PUMP PUMP
FULL FULL FULL FULL
10.5 Cooling fan system
The appliance is equipped with a cooling system which comes into
operation as soon as a cooking function starts.
Operation of the fans generates a normal air flow which comes out
above the door and may continue for a short time even after the oven
is switched off.
10.6 Inside light
The oven light comes on:
If the oven door is left open, the oven light will automatically shut-off after
10 minutes.
20
Instructions for the User
DESCALING
SOFT WATER.
MEDIUM WATER.
HARD WATER.
APPLIANCE MUST BE DESCALED.
FLASHING – DESCALING STARTS.
FEED 0.5 LITRE DESCALING SOLUTION INTO THE WATER TANK.
FEED 1 LITRE COLD WATER INTO THE WATER TANK FOR RINSING.
WATER TANK
INDICATION THAT WATER TANK IS MISSING OR WRONGLY INSERTED
THE WATER TANK MUST BE REMOVED, EMPTIED AND REINSERTED.
STEAM REDUCTION AND WATER PUMPING
INDICATION THAT STEAM REDUCTION PROCESS IS ONGOING.
INDICATION THAT COLD WATER IS ENTERING THE BOILER AND HOT
WATER IS BEING PUMPED TO THE WATER TANK.
THE WATER TANK MUST BE REMOVED, EMPTIED AND REINSERTED.
PERFORM WATER LEVEL CALIBRATION ( SEE 8.3.2)
SYSTEM WARNINGS
TEMPERATURE IN THE PCB IS TOO HIGH.
SYMBOLS
CHILD SAFETY LOCK-OUT FUNCTION
DESCALE FUNCTION
WATER LEVEL INDICATION
TEMPERATURE
when the oven door is opened in standby status (point "8.2
Operating settings") or;
when the function knob is turned to any function.
DESCRIPTION