Description Of Front Panel Controls; Function Display; Programmed Cooking Operation Display; Thermostat-Timer Knob - Smeg S45MFA Instruction Manual

6. DESCRIPTION OF FRONT PANEL CONTROLS

All the appliance's control and monitoring devices are placed together on
the front panel. The table below provides the key to the symbols used.
This knob allows you to set the time, select the
PT1
cooking temperature and duration and program
the cooking start and end times. From now on,
for convenience it will be referred to as PT1.
For instructions on how to use it correctly, see
point
cooking procedures".
CURRENT TIME/PROGRAMMED COOKING OPERATION DISPLAY
DSP1 This display shows the current time or the cooking duration.
From now on, for convenience it will be referred to as DSP1.
DSP2 This display shows the temperature set for the function required, or the
temperature set by the user.
Also visible are the function cutout light
lock-out function") and the preheating level
function").
From now on, for convenience it will be referred to as DSP2.
DSP3 This display shows (illuminated) all the cooking functions available for
selection. For instructions on how to select a cooking function, see point
"7.2 Operating modes".
From now on, for convenience it will be referred to as DSP3.
34
Instructions for the User

THERMOSTAT-TIMER KNOB

"7.3 First use" and "7.5 Programmed
TEMPERATURE DISPLAY

FUNCTION DISPLAY

(see point "7.6.1 Child safety
(see point "7.4 Selecting the