6. Board Test System
792833 | 2024.02.21
6.4. The Power Monitor
You can start the Power Monitor application with the following:
•
The Power Monitor button on the Board Test System GUI.
•
The PowerMonitor.exe application that resides in the
\cycloneVGT_5cgtfd9ef35_fpga\examples\board_test_system
6.4.1. Power Monitor Features
The Power Monitor measures and reports current power information and
communicates with the MAX V device on the board through the JTAG bus. A power
monitor circuit attached to the MAX V device allows you to measure the power that
the Cyclone V GT FPGA is consuming. The following figure shows the Power Monitor.
Figure 14.
The Power Monitor
Send Feedback
<install dir>\kits
®
Cyclone
V GT FPGA Development Kit User Guide
directory.
37