Checking the Recorded Picture
The editsearch function is used to view the recorded picture for a moment during recording.
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the
viewfinder.
In standby mode, press the - (©) side of EDITSEARCH momentarily; the last few seconds of the
recorded portion plays back (Rec Review). You can also monitor the sound by using headphones (not
supplied).
Hold down the - side of EDITSEARCH until the camcorder goes back to the scene you want. The last
recorded portion is played back. To go forward, hold down the + side (Editsearch).
ƏN id
Buipao»ay
ayy
$uppeuj/Bunoous
191138
404
sjutH
j
To Begin Rerecording
Press START/STOP.
Provided you do not eject the cassette, the transition between the last scene you
recorded and the next scene you record will be smooth.
15