Table of Contents
Advertisement
PAGE
6
WEIDER SPORTING GOODS
STEP
1
BASE
ASSEMBLY
PART NAME .. Aen
an
22 nubeenreet
sda
in aw xa"
nexus
sda
st aw
riarwasnen
O
fe]
s sarnveonuocknur
| > |
[_] Assemble the REAR BASE TUBE (2) to the BASE "T" (1) using 3/8" X 4" HEX HEAD BOLTS (41), 3/8" FLAT WASHERS
(51), and 3/8" NYLON LOCK NUTS (54).
[_] Turn the BASE "T" (1) so that the tube welded atop the Base 'T' is up. Cap the ends of the BASE "T" (1) and the REAR
BASE TUBE (2) with RUBBER FEET (22) so that the Foot Pad is to the floor.
[ ] insert 1" ROUND RUBBER PEDAL DAMPER CAPS (20) over the ends of the round tube welded to the Base "T".
a).
WELDED
29 TUBE
Advertisement
Table of Contents
