Assembling The Stand - JVC 24WCF Operating Instructions Manual

Step 1
Lay the monitor on a cloth with the panel facing
down to prevent the panel from being damaged.
Step 2
Align the Stand Body with the screw holes on the
back of the monitor. Then tighten the supplied
screws as shown.
Step 3
Attach the Cover Plate to the back of the monitor.
Step 4
Align the Stand Base with Stand Body. Then tighten
the supplied screw as shown.

Attach the cover plate to the back from the bottom end,
aligning the groove of the cover plate with the stand body.

ASSEMBLING THE STAND


Press the upper end of cover
plate until it secures in place.
EN-6