Installation And Connections - Smeg FL227APZD Instructions For Use Manual

Installation and connections

Selecting the location Selecting the location
Positioning the Positioning the
appliance appliance
6
• Place the appliance in dry and well aired room. The
appliance operates best at temperature ranges indicated in
the chart below. Relevant class of the appliance is indicated
on the rating plate.
Class
SN (subnormal)
N (normal)
ST (subtropical)
T (tropical)
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base. The
appliance is fi tted with adjustable feet on the front side, used
to level the appliance (certain models only).
• Avoid exposing the appliance to direct sunlight or heat
sources. If this is not feasible, install insulation plate between
the appliance and adjacent heat source.
• The appliance may stand independently or you may
incorporate it into the kitchen cabinet. Be sure to leave
enough space for cooling of condenser (distance from the
wall or the opening should be 200 cm
cabinet above the appliance should be at least 5 cm.
After the installation, the appliance mains plug should be
accessible!
Ambient temperature
from + 10°C to + 32°C
from + 16°C to + 32°C
from + 16°C to + 38°C
from + 16°C to + 43°C
). Distance to the
2