Table of Contents
Advertisement
Setting Label Attributes ([Length]/[Margin]/[Tab Length])
(Refer to "Adjusting the Label Length" on page 23, "Setting Margin" on
page 21 and "To change tab length:" on page 10.)
(
)
/
Select an attribute
or (
).
NOTE
[Length] can be set within the range 30 mm - 300 mm. When [Auto] is
selected, the length of the label is automatically adjusted based on the
amount of text entered.
Creating a Barcode Label
NOTE
• The P-touch is not designed exclusively for creating barcode labels.
Always check that barcode labels can be read by the barcode reader.
• For best results, print barcode labels in black ink on white tape. Some
barcode readers may not be able to read barcode labels created
using coloured tape or ink.
• Use the [Large] setting for [Width] whenever possible. Some barcode
readers may not be able to read barcode labels created using the
[Small] setting.
• Continuously printing a large number of labels with barcodes can
overheat the print head, which may affect printing quality.
Setting Barcode Parameters and Entering Barcode Data
(
)
/
(
) or (
)
character
(
) or (
NOTE
• Symbols are only available for the CODE39, CODE128, CODABAR
or GS1-128 protocols. When not using symbols, after typing in the
barcode data, press (
• The "C.Digit" (Check Digit) attribute is only available for the CODE39,
I-2/5 and CODABAR protocols.
• Only one barcode can be printed on a label.
Select an attribute
Type in the barcode data
)
(
) or (
) or (
/
Set a value for that attribute
/
Set a value for that attribute
(
)
).
) to insert the barcode in the label.
Setting Label Attributes ([Length]/[Margin]/[Tab Length])
EDITING A LABEL
(
/
Select a
)
17
Advertisement
Table of Contents
