Changing Of Door Opening Direction - Smeg FD54PXNFE Instruction Booklet

Changing of Door Opening Direction

In case you need to change door-opening direction, please consult the domestic after
sales service.
PART- 6.
BEFORE CALLING YOUR AFTER SALES SERVICE
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
ERROR CODE MEANING
SR
warnings
LV
voltage
What to do if your refrigerator does not operate;
Check that;
• There is no power ,
• The general switch in your home is disconnected ,
• The thermostat setting is on «0» position ,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
• You have not overloaded the appliance ,
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
It appears when one or
Fault several parts of the fridge
fail or a problem occurs on
the cooling system.
Fridge switches to stand-by
Low condition when the voltage
supply is lower than 170
Volts.
(In some models)
CAUSE
UK - 18 -
ACTIONS TO BE TAKEN
Contact the nearest authorized
technical service as soon as
possible.
This feature prevents damage
to the compressor due to low
voltage. Fridge will start
operating automatically when
the supply voltage reaches the
desired level.