BEFORE USING THE APPLIANCE ... 2 Safety Instructions ... 2 Recommendations ... 3 Installation and Switching On The Appliance ... 4 Before Switching On ... 4 USAGE INFORMATION ... 5 Display and Control panel ... 5 Use of control panel ... 6 Operating your Fridge ...
BEFORE CALLING YOUR AFTER SALES SERVICE ... 18 THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS ... 21 PART- 1. BEFORE USING THE APPLIANCE Safety Instructions • If the model contains R600a-see name plate under refrigerant (the coolant isobutane), naturals gas that, is very environmentally friendly but also combustible. When transporting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged.
Recommendations Warning: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Installation and Switching On The Appliance • This appliance is connecting to 220-240V and 50 Hz. • You can offer help from the service to install and switching on the appliance. • Before making the connection to the power supply,ensure that the voltage on the name plate corresponds to the voltage of electrical system in your home.
Use of control panel 1. Indicator and bar of Super Freeze mode 2. Indicator and bar of Super Cool mode 3. Adjustment indicators and bars of freezer. The active setting value will be illuminated. All bars from minimum up to the relative setting value will be illuminated.
How would it be used? • Press button F until letters "SF" and relative bar graphic light up. • If pressed on no button in 1 second, SF and bar graphics will flash 3 times and a beep sound will be released. •...
Economy Mode Freezer and Cooler operate in the economical conditions that are determined in the control unit. When would it be used? When you want your fridge to operate economically. How would it be used? • Touch button ECO. • ECO will start flashing •...
Screensaver Mode When would it be used? If you do not want the illumination of control panel to operate and consume energy in vain though you do not change any setting, you can activate this mode. How to use? • This mode will be activated when you press on Screen saver button for 5 seconds. •...
Cooler Temperature Settings • Initial temperature value for the Cooler Indicator is +5°C. • Press cooler (R) button once. • When you first push this button, +4°C appears on the setting indicator of the cooler. • Whenever you press on this button, one bar comes on cooler bar graphic indicator and lower temperature will be set.
Note: If the temperature of the environment is higher than 38°C, the freezer partition temperature cannot be adjusted to -22°C and -24°C. It can only be adjusted to the values of -16°C, -18°C, -20°C. Accessories Making Ice Cubes • Take out the ice making tray •...
Drawer (Optional) Drawer compartment has four pieces of drawer boxes in order to allow you to keep your foods and use these for breakfast easily. For consumer’s usage comfort and for the optimum of storage foods, you can easily move your drawer to right or to left direction.
Crisper and Crisper Shelf The crisper compartment absorbs and decomposes ethylene gas (*) emitted from fruits and vegetables with a “FILTER” in the crisper shelf, keeping fruits and vegetables fresh. The filter also eliminates unpleasant odours from inside the crisper, and control the excess water released by the vegetables, maintaining a high humidity environment inside the crisper.
REMOVING THE CRISPER COVER First Step : Removing the crispers • It is easy to pull out the crisper because of the crisper has rollers. • Pull the crisper out as far as possible and pull the front part up and out Second Step: Taking out the Partition Crisper Center between the crispers.
PART- 3. ARRANGING FOOD IN THE APPLIANCE Refrigerator Compartment • For normal operating conditions, adjusting the temperature value of the cooler partition of the fridge to 4°C will be enough. • To reduce humidity and consequent increase of frost never place liquids in unsealed containers in the refrigerator.
• The storage life of frozen foods depends on the room temperature, thermostat setting, how often the door is opened, the type of food and the length of time required to transport the product from the shop to your home. Always follow the instructions printed on the package and never exceed the maximum storage life indicated.
Replacing The Refrigerator and Freezer Light Bulb Refrigerator Light 1. Unplug the unit from the power supply, 2. Remove the refrigerator light cover by pulling out firmly, 3. Change the present light bulb with a new one of not more than 15 W. 4.
Changing of Door Opening Direction In case you need to change door-opening direction, please consult the domestic after sales service. PART- 6. BEFORE CALLING YOUR AFTER SALES SERVICE If your refrigerator is not working properly, it may be a minor problem, therefore check the following, before calling an electrician to save time and money.
Page 20
IIf your fridge is operating too loudly; Normal Noises Cracking (Ice cracking) Noise: • During automatic defrosting. • When the appliance is cooled or warmed (due to expansion of appliance material). • Heard when the thermostat switches the compressor on/off. Compressor noise •...
Page 21
IMPORTANT NOTES: • Compressor protection function will be activated after sudden power breakdowns or after unplugging the appliance, because the gas in the cooling system is not stabilized yet. Your fridge will start after 5 minutes, there is nothing to worry about. •...
Page 22
THE PARTS OF THE APPLIANCE AND THE PART- 7. This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model. 1) FAST FREEZING SHELF 2) ICE TRAY 3) ICE BOX 4) FREEZER SHELF 5) FREEZER COMPARMENT 6) FREEZER LAMP COVER 7) CHILLER SHELVES...