Cooler Temperature Settings; Freezer Temperature Settings; Warnings About Temperature Adjustments - Smeg FD54PXNFE Instruction Booklet

Cooler Temperature Settings

• Initial temperature value for the Cooler Indicator is +5°C.
• Press cooler (R) button once.
• When you first push this button, +4°C appears on the setting indicator of the cooler.
• Whenever you press on this button, one bar comes on cooler bar graphic indicator
and lower temperature will be set. (+8°C, +6°C, 5°C, +4°C, +2°C)
• When you push the cooler button until +2°C (maximum cold) appears on the cooler
setting indicator, and when you keep pushing, letters SC (Super Cool) will flash.
• If you continue to press, it will restart from +8°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super
Cool Mode or Economical Mode is activated will remain the same when the mode is
over or cancelled. The appliance continues to operate with this temperature value.

Freezer Temperature Settings

• Initial temperature value for Freezer Setting Indicator is -18°C.
• Press freezer (F) button once.
• When you first push this button, -20°C appears on the setting indicator of the freezer.
• Whenever you press on this button, one bar comes on Freezer Bar Graphic Indicator
and lower temperature will be set. ( -16°C, -18°C, -20°C, -22°C, -24°C)
• When you push the freezer button until -24°C (maximum cold) appears on the Freezer
Setting Indicator, and when you keep pushing, letters SF (Super Freeze) will flash.
• If you continue to press, it will restart from -16°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super
Cool Mode or Economical Mode is activated will remain the same when the mode is
over or cancelled. Your appliance will continue operating in this temperature value
selected.

Warnings about Temperature Adjustments

• Your temperature adjustments will not be deleted when an energy breakdown occurs.
• It is not recommended that you operate your fridge in environments colder than 10°C
in terms of its efficiency.
• Temperature adjustments should be made according to the frequency of door
openings and the quantity of food kept inside the fridge.
• Do not pass to another adjustment before completing an adjustment.
• Your fridge should be operated up to 24 hours according to the ambient temperature
without interruption after being plugged in to be completely cooled. Do not open
doors of your fridge frequently and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor of your
fridge, when you take the plug off and then plug it on again to operate it or when an
energy breakdown occurs. Your fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. We do not
recommend operating your fridge out of stated temperatures value limits in terms of
cooling effectiveness.
UK - 10 -